Every job
Audit-ready
Near-net shape
Days
The challenges subsea operators face
Long lead times for one-off parts
Subsea equipment uses heavy, low-volume components that take a long time to source. MaxQ prints parts in near-net shape from the CAD file, when you need them.
Qualification is non-negotiable
Parts that go subsea must be proven before they are installed. Every MaxQ job logs voltage, current, temperature and 3D scans.
Parts we repair and 3D print for subsea
- Water bushings
- Connectors
- Valve components
Your part is not on the list? MaxQ works from a 3D scan of the part as it is, so most worn or missing metal geometry can be rebuilt. Ask us about your part
How to repair your subsea part with MaxQ
About MaxQ Repair
MaxQ Repair is an all-in-one automated solution for the repair of metal parts, such as rails, rotors and dies, that are subject to wear in service.
Book a demoHow to 3D print your subsea part with MaxQ
About MaxQ 3D Print
MaxQ 3D Print is the turn-key WAAM system for 3D printing high-quality, certified metal parts, with real-time monitoring and certification-ready reports.
Book a demoHow MaxQ 3D Print works
01
Scan & align
The surface is scanned after every layer, and the toolpath is adjusted for constant stick-out and a near-net shape.
02
Monitor & control
Sensors track the process in real time, with automatic interpass temperature control.
03
Verify & certify
All data is stored and exported in a certification-ready report.
Frequently asked questions
Can MaxQ 3D Print produce subsea components?
Yes. MaxQ 3D Print builds heavy, low-volume components in near-net shape directly from the CAD file, such as the 1.2 m, 220 kg pressure-containing water bushing that Vallourec designed for Total.
Read the caseHow is a printed subsea part qualified?
Every MaxQ job logs voltage, current, temperature and 3D scans, and MaxQ 3D Print exports audit-ready reports, for example for compliance with Lloyd's Register or DNV standards.
More about MaxQ 3D PrintWhich steels are available for offshore applications?
The RAMLAB materials library lists high-strength steels such as X90, S690 and S460, which are used in offshore applications.
Materials libraryHow fast is MaxQ 3D Print?
MaxQ 3D Print deposits up to 5 kg of metal per hour, so you go from design to part in days, not months.
More about MaxQ 3D PrintWhat is WAAM?
Wire Arc Additive Manufacturing (WAAM) is a production process used to 3D print or repair metal parts. A welding robot deposits layers of metal wire on top of each other until the shape is complete. It belongs to the Directed Energy Deposition (DED) family and deposits material only where it is needed.
Read moreLeave your details to book a 30 minute demo
In an online call of 30 minutes, we will show you the functionality and practical applications of MaxQ Repair and MaxQ 3D Print for your parts.
Don’t see your industry? Talk to us





















